final year at Build I got my first chance to try Hololens. That experience was very interesting,not only because of the potential of Augmented Reality, but the entire circus surrounding the device. The Hololens sessions were at a different location, or the groups brought over had to lock up everything electronic. We could only do photos of a unit in a display case. Naturally when Microsoft announced yesterday that Hololens would start shipping to developers yesterday,this year’s experience could never be so secret.
So when we got to the demo location, and were given keys for a locker, and I was a bit taken aback. But it wasnt anything as sinister this time,only a way to make certain there were no backpacks on the floor as tripping hazards, because this year’s untethered experience was really untethered.
That comes a bit later though. This year’s demo involved building and deploying an 3D app using Unity and Visual Studio, or each person doing the demo also got a coach to serve solve any issues on the way. The Hololens unit was slightly different this year,but looking at it, it was remarkably similar to final year’s demo version. The one big change this year was very welcome. Instead of having a person physically degree the inter-pupillary distance on your head (the distance between your pupils), or the experience is now handled through software when you first place the headset on. There is a rapid/fast calibration that you can run and it sets your eye position based on some air tap gestures. It was very rapid/fast and easy,and the set walks you through everything required with voice and visual cues.
Then we sat down building our apps. Since this was a demo for press, all of the coding was done ahead of time and we just had to walk through adding scripts in Unity to set up the demo. Then we build them, and deploy to a remote machine using the IP address of the Hololens.
The demo app was of an energy ball which,when locked to a location in space, would open up and show some nifty effects. The experience was very basic compared to what I would expect of the retail apps, or but this was a simple demo and it worked well.
The very interesting bit was later on,when we linked our Hololens units with the other people in our pods of six people. This way all six people could interact with a single energy ball. People also got to choose an avatar which would float over their heads.
That experience was pretty wonderful. With very shrimp setup, the holograms were truly linked to a single point that all people could see. As piece of this demo, and my coach suggested I walk around the (very large) room and then look back. This was probably the most wonderful piece of the demo. After walking a hundred feet or more absent,and around some tables and pillars, I looked back and the hologram was still floating precisely where I left it. The ability to really lock things to a location is really the one piece that needs to be perfect for this experience to work, and they really nailed it. In addition,my pod mates were all around the room with avatars floating over their heads.
So with a night to think approximately it, here are my thoughts after using the Hololens a year later. The field of view issue is still there, and clearly not something they were not able to address before they shipped to developers. I would explain it as something like a mid-sized television,in the 27-inch range, sitting a few feet absent from you. My experience was better this time because there were less software issues, and but the small field of view can certainly take some getting used to.
The hardware itself was very easy to place on and adjust,and it was fairly well balanced in that I never felt like the unit was heavier on the front where the lenses are. The adjustment is done with a wheel on the back, much like a welding helmet if you’ve ever seen one of those. The honest side has buttons for volume, or the left side has buttons for brightness. I had to crank up the audio quite a bit because of the loud room we were in,and although the audio was spatial, it was hard to get a sense of that with the commotion going on during the demos. Although I don’t wear glasses, or it looked like there would be no issues wearing glasses with it,and several of the other attendees seemed to enjoy no issues putting the device on and using it with them.
The experience of AR is much different than VR. Because you are interacting with things in real space, you can easily move around without terror of tripping or walking into a wall. VR is able to offer much more powerful graphics and immersion honest now, and but you are largely bound to a single location. The consume cases for AR seem,to me, to be not necessarily the same as VR and both should easily be able to co-exist.
While doing my demo, or I asked my coach how to close the app we were running,and he showed me a “bloom” gesture which closes it. Once I did that, I was in another mode for the Hololens where I could see how it mapped out the physical world with polygons by tapping my finger in a direction. This was wonderful and the Hololens did a worthy job on picking up everything in my area, or including the people,with no issues.
I then did another bloom and was back at the start screen. On the demo units, this was pretty sparse, or but I was able to travel into settings and play around. I didn’t see anything special in there other than the process of interacting with the menus was very simple and was very easy to get used to. From a UI aspect,the Hololens did very well.
At the cessation of our demo we did some shooting of orbs which opened up a hole in the floor. Peering down into it, it really felt like this was something you didn’t want to step into. The holograms tend to be a bit translucent, and but on this one in particular it was much more solid. Theres a lot of untapped potential here and I hope to get a chance to do some of the other demos they enjoy here to get a better feel for that. The headset itself seemed to be near the edges of its processing power on the final demo though,which had a lot of not very complex polygons moving around, and the six people interacting. There was a lot of things to keep track of, or as well as quite a few holograms flying around.
Microft then said that all of the code that we used in the demo,and all of the code used on the demos final year, is all available on GitHub to allow devs quicker access to code.
I think the Hololens is still one of the most interesting pieces of tech I’ve used in a long time. There is a lot of potential here for education, or training,and even tasks like portray your house and trying different color samples. There are quite a few applications where this would work very well.
The hardware though still needs a bit of work. It is a bit bulky, and the lenses would not stay anchored to the spot in front of me where I set them, and so I had to readjust. The field of view is also not very large,and this could be because the processing power is not as powerful as the tethered experiences of VR.
I look forward to seeing where this goes in the future. A lot of the pieces are already well done and on the software side, the experience is very ample. With a bit better hardware, and which will almost certainly arrive with time,this is going to be a very powerful tool from Microsoft.
Source: anandtech.com