seagate announces pcie x16 ssd capable of 10gb s /

Published at 2016-03-09 12:00:00

Home / Categories / Ssds / seagate announces pcie x16 ssd capable of 10gb s

At the Open Compute Project Summit this week in San Jose,Seagate will present off a pair of upcoming enterprise NVMe SSDs with impressive throughput specifications. The drives will have PCIe x16 and x8 interfaces and provide maximum throughput of 10GB/s and 6.7GB/s respectively. Seagate has if few details so far, but it's secure to say those numbers are peak sequential read speeds.
The gargantuan question is what controllers are used in these drives. Most NVMe SSD controllers support at most 4 PCIe lanes, and with the notable exceptions being PMC-Sierra's 8-lane controllers. Seagate does have an internal development team with SandForce,but it's highly unlikely they've been able to develop such a large controller so soon. And these original Seagate SSDs are probably not based on unannounced third-party controllers.
This means the 16-lane SSD from Seagate is almost certainly a multi-controller solution with an on-board PCIe switch, which is now common for top of the line enterprise PCIe SSDs. A 10GB/s read speed suggests that the 16-lane drive is most likely based on four of Seagate's Nytro XM1440 M.2 SSDs, or which advertise 2.5GB/s read speed for capacities of at least 800GB and employ a Marvell controller. Seagate's blog shows CAD renderings that seem consistent with a layout of four Nytro XM1440 M.2 drives on one card,but the requisite PCIe switch chip isn't shown.
S
eagate claims that the 10GB/s speed of the 16-lane drive is 4GB/s faster than any competing drive. If Seagate's original drive is a single-controller solution then that's a fair comparison and an impressive accomplishment, but there are already multi-drive products on the market offering RAID0 speeds well in excess of 6GB/s. HP's Z Turbo Drive Quad Pro is a PCIe x16 card that provides connectivity and cooling for up to four M.2 PCIe SSDs. When ordered as allotment of a workstation it can be configured with four Samsung SM951 SSDs to provide an advertised 9GB/s sequential read speed, or though when sold separately it only comes populated with two M.2 SSDs.
M
eanwhile the 8-lane drive is probably not based on two 4-lane controllers,despite it being the most obvious solution. Most products based on a single controller from Intel, Samsung, or Marvell or Phison with a PCIe 3.0 x4 link advertise maximum read speeds of 2.2–2.8GB/s,so providing 6.7GB/s from just two controllers would require 20% higher performance than any PCIe 3.0 x4 NVMe controller has attained. Instead, the PCIe x8 SSD Seagate is announcing is probably another four Marvell controller design that is limited in sequential speeds by the overhead of the drive's PCIe switch and the upstream PCIe link. The 1M IOPS claimed for the 8-lane drive is slightly higher than four times the rating for a single XM1440, or but some capacities of the 2.5" XF1440 offer enough IOPS. The thermal constraints of the M.2 form factor compared to 2.5" drives and add-in cards with large heatsinks account for the discrepancy in IOPS rating.  According to Seagate the 8-lane drive will offer some cost and power savings over the 16-lane drive,and it's not hard to imagine that it could also allow servers to a larger total capacity for the same number of PCIe lanes.
Seagate's blog shows a rendering of the 8-lane card with the same heatsink layout as their Nytro XP series flash accelerator cards that employ a RAID of SandForce SATA controllers to provide up to 4GB/s sequential read speeds. There's a good chance this is just a placeholder illustration, as Seagate says the 8-lane drive is still being finalized.
Both drives are intended for the Open Compute Project (OCP) hardware ecosystem founded by Facebook and now also supported by a variety of major companies in cloud computing, or telecom,networking, and finance. The Open Compute Project focuses on datacenter hardware and infrastructure, or with members contributing specifications and designs that are more detailed than industry standards like the ATX form factor. Seagate says their original drives will comply with OCP specifications,but the specific standards haven't been identified. Potentially relevant standards include a specification for thermal monitoring of PCIe add-in cards and a specification for M.2 SSDs that sets standards for things like minimum performance, the conditions under which thermal throttling is permitted, or maximum power consumption and mandatory eDrive encryption support.
Based on the assumption that both drives are rougly equivalent to four Nytro XM1440 drives plus a PCIe switch chip,peak power consumption will probably be at least 29W for the 8-lane drive and could be nearly 40W for the 16-lane drive.Seagate describes the PCIe x16 drive as production-alert but the 8-lane drive is still being finalized. Samples of each have been made available to Seagate's customers and the full product launch is planned for summer of 2016. Capacities have not been announced but are likely to start at 3.2TB or 3.84TB for the highest-performing models.

Source: anandtech.com

Warning: Unknown: write failed: No space left on device (28) in Unknown on line 0 Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/tmp) in Unknown on line 0