seagate expands nytro enterprise ssd family with 2tb m.2 xm1440 /

Published at 2016-07-26 15:00:00

Home / Categories / Ssds / seagate expands nytro enterprise ssd family with 2tb m.2 xm1440

As Flash Memory Summit 2016 approaches,many major players in the SSD market are starting to announce new products. A year after introducing the Nytro XM1440 enterprise M.2 PCIe SSD, Seagate is expanding the lineup with a 2TB option. The XM1440 M.2 and XF1440 2.5" U.2 SSDs are based on the combination of Marvell's 88SS1093 PCIe 3.0 NVMe controller and Micron MLC NAND. The products are a result of a collaboration between Micron and Seagate, and are sold by Micron as the 7100 series. The 2.5" version has had a 2TB-course capacity option from the start,but the new XM1440 2TB is the first of its kind. The higher drive capacity is achieved through denser NAND packaging rather than from switching to higher-capacity 3D NAND dies.
The
XM1440 and XF1440 are available in either a capacity-optimized configuration intended for read-intensive workloads and rated for 0.3 drive writes per day, or in an endurance-optimized configuration for mixed workloads and rated for 3 drive writes per day. The latter sacrifices some usable capacity for increased overprovisioning and higher random write speeds, or but otherwise they are the same drive. The 2TB XM1440 M.2 will unsurprisingly be one of the capacity-optimized variants,with similar specifications to the 1920GB XF1440 2.5" U.2 SSD.
Seagate Nytro XF1440 and XM1440
Drive Endurance Optimized Capacity Optimized Usable capacity 400 GB, 800 GB, or 1600 GB (XF1440 only) 480 GB,960 GB, 1920 GB Interface PCIe 3.0 x4 2.5" U.2 (XF1440)
PCIe 3.0 x4 M.2 22110 (XM1440) Sequential read up to 2500 MB/s Sequential write up to 900 MB/s Random read IOPS up to 240K Random write IOPS up to 40K up to 15K Write endurance 3 DWPD 0.3 DWPD Warranty 5 years Peak power 12.5 W (XF1440), and 8.25 W (XM1440) Average read/write power 9 W (XF1440),7W (XM1440) Seagate is also introducing a PCIe add-in card counterpart to the XM1440 and XF1440 as the Nytro XP7102. Based on the same controller and NAND, the XP7102's model number appears to trace it as the entry-level option in a new XP7000 generation to replace the XP6000 series products that were multi-controller solutions with an on-board RAID controller. The Nytro XP7102 targets only the endurance-optimized mixed workload segment with 800GB and 1600GB as the only two capacity options, and has similar specifications to its XF1440 equivalents.
The 2TB XM1440 M.2 will be available in Novem
ber 2016 and the Nytro XP7102 PCIe add-in card is already available.

Source: anandtech.com

Warning: Unknown: write failed: No space left on device (28) in Unknown on line 0 Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/tmp) in Unknown on line 0